- What is data bus?
- What is single bus problem?
- What is bus and its types?
- What is single bus structure?
- What is the advantage of multiple bus organization over single bus?
- What is the purpose of the bus?
- What is the purpose of address bus?
- Which bus is used to connect monitor to the CPU?
- What is a good bus speed?
- What does bus mean?
- Is an extension of the processor bus?
- What are the benefits of using multiple bus architecture as compared to single bus architecture how bus speed puts impact on the system in above both cases?
- What is multiple bus?
- What are the 3 types of buses?
- What is the function of a data bus?
What is data bus?
From Wikipedia, the free encyclopedia.
Databus may refer to: Bus (computing), a communication system that transfers data between different components in a computer or between different computers.
Memory bus, a bus between the computer and the memory..
What is single bus problem?
Lots of devices on one bus normally face quite a number of problem the common one are delay the propagation, because connecting many device will lead to long data paths and meaning that co-ordination of bus use can adversely affect the performance if aggregate data transfer approaches bus capacity. …
What is bus and its types?
There are three types of buses. Address bus – It is a group of conducting wires which carries address only. Address bus is unidirectional because data flow in one direction, from microprocessor to memory or from microprocessor to Input/output devices (That is, Out of Microprocessor).
What is single bus structure?
A system bus is a single computer bus that connects the major components of a computer system, combining the functions of a data bus to carry information, an address bus to determine where it should be sent, and a control bus to determine its operation.
What is the advantage of multiple bus organization over single bus?
Speed and Efficiency The waiting wastes time, slowing the computer down. Multiple buses permit several devices to work simultaneously, reducing time spent waiting and improving the computer’s speed. Performance improvements are the main reason for having multiple buses in a computer design.
What is the purpose of the bus?
In computer architecture, a bus (a contraction of the Latin omnibus, and historically also called data highway) is a communication system that transfers data between components inside a computer, or between computers.
What is the purpose of address bus?
An address bus is a computer bus architecture. It is used to transfer data between devices. The devices are identified by the hardware address of the physical memory (the physical address). The address is stored in the form of binary numbers to enable the data bus to access memory storage.
Which bus is used to connect monitor to the CPU?
Explanation: The PCI BUS basically is used to connect to memory devices. Explanation: The SCSI (Small Component System Interconnect) is used to connect to display devices.
What is a good bus speed?
Bus speed usually refers to the speed of the front side bus (FSB), which connects the CPU to the northbridge. … FSB speeds can range from 66 MHz to over 800 MHz. Since the CPU reaches the memory controller though the northbridge, FSB speed can dramatically affect a computer’s performance.
What does bus mean?
A bus is a subsystem that is used to connect computer components and transfer data between them. For example, an internal bus connects computer internals to the motherboard. A bus may be parallel or serial. Parallel buses transmit data across multiple wires. Serial buses transmit data in bit-serial format.
Is an extension of the processor bus?
Explanation: The PCI BUS is used as an extension of the processor BUS and devices connected to it, is like connected to the Processor itself. … Explanation: The SCSI BUS is used to connect the video devices to a processor by providing a parallel BUS.
What are the benefits of using multiple bus architecture as compared to single bus architecture how bus speed puts impact on the system in above both cases?
Benefits of multi bus architecture when compared to that of the single bus architecture are: a) The multi bus architecture offers high speed and efficiency. This is because in multi bus architecture, the processor shares a multiple number of buses.
What is multiple bus?
The MULTIBUS II architecture is an open system bus architecture for general purpose 8-, 16- or 32-bit microcomputer systems design.
What are the 3 types of buses?
Three types of bus are used.Address bus – carries memory addresses from the processor to other components such as primary storage and input/output devices. … Data bus – carries the data between the processor and other components. … Control bus – carries control signals from the processor to other components.
What is the function of a data bus?
A data bus can transfer data to and from the memory of a computer, or into or out of the central processing unit (CPU) that acts as the device’s “engine.” A data bus can also transfer information between two computers.